Home › Drivetrain › K312 CVT › REVOLUTION SENSOR › from 2016.04
RM30M0E _52 Drivetrain _052969 K312 CVT _0259993 REVOLUTION SENSOR A

K312 CVT  REVOLUTION SENSOR  REMOVAL  


PROCEDURE

Hide 51442C 1.REMOVE ENGINE UNDER COVER LH (w/o Metal Type Under Cover)

Hide 51451A 2.REMOVE CENTER ENGINE UNDER COVER (w/ Metal Type Under Cover)

Hide 51405A 3.REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY (w/ Metal Type Under Cover)

Hide 89413P 4.REMOVE TRANSMISSION REVOLUTION SENSOR (NIN)

a.
C265864

Disconnect the transmission revolution sensor (NIN) connector.


b.

Remove the bolt and transmission revolution sensor (NIN) from the continuously variable transaxle assembly.


c.

Remove the O-ring from the transmission revolution sensor (NIN).


Hide 89413M 5.REMOVE TRANSMISSION REVOLUTION SENSOR (NOUT)

a.
C265865

Disconnect the transmission revolution sensor (NOUT) connector.


b.

Remove the bolt and transmission revolution sensor (NOUT) from the continuously variable transaxle assembly.


c.

Remove the O-ring from the transmission revolution sensor (NOUT).