Home › Drivetrain › K312 CVT › PARK / NEUTRAL POSITION SWITCH › from 2016.04
RM30M0E _52 Drivetrain _052969 K312 CVT _0259995 PARK / NEUTRAL POSITION SWITCH G

K312 CVT  PARK / NEUTRAL POSITION SWITCH  INSPECTION  


PROCEDURE

Hide 84540 1.INSPECT PARK/NEUTRAL POSITION SWITCH

a.
C197712C97
1.604,0.948 2,0.417 true 1.844,0.958 2.417,0.583 true 1.406,0.948 1,0.417 true 1.271,0.948 0.698,0.583 true 0.896,1.667 1.344,1.281 true 1.333,1.75 1.469,1.281 true 2,1.75 1.719,1.281 true 0.115,0.125 0.427,0.323 0.313,0.198 10 false *a 0.573,0.5 0.792,0.698 0.219,0.198 10 false B 0.823,0.344 1.094,0.542 0.271,0.198 10 false PL 2.063,0.344 2.333,0.542 0.271,0.198 10 false RL 2.469,0.5 2.74,0.698 0.271,0.198 10 false RB 1.979,1.781 2.25,1.979 0.271,0.198 10 false DL 1.271,1.781 1.542,1.979 0.271,0.198 10 false NL 0.844,1.688 1.115,1.885 0.271,0.198 10 false L
*a Component without harness connected
(Park/Neutral Position Switch)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
4 (B) - 9 (L) Shift lever in P or N Below 1 Ω
Shift lever not in P and N 10 kΩ or higher
1 (RB) - 3 (PL) Shift lever in P Below 1 Ω
Shift lever not in P 10 kΩ or higher
1 (RB) - 2 (RL) Shift lever in R Below 1 Ω
Shift lever not in R 10 kΩ or higher
1 (RB) - 8 (NL) Shift lever in N Below 1 Ω
Shift lever not in N 10 kΩ or higher
1 (RB) - 7 (DL) Shift lever in D or M Below 1 Ω
Shift lever not in D and M 10 kΩ or higher


If the result is not as specified, replace the park/neutral position switch.