Home › Engine / Hybrid System › 1NR-FE ENGINE CONTROL › IGNITION COIL AND SPARK PLUG › from 2016.04
RM30M0E _51 Engine / Hybrid System _053310 1NR-FE ENGINE CONTROL _0260022 IGNITION COIL AND SPARK PLUG A

1NR-FE ENGINE CONTROL  IGNITION COIL AND SPARK PLUG  REMOVAL  


PROCEDURE

Hide 19500D 2.REMOVE NO. 1 IGNITION COIL

a.
A381917

Disconnect the 4 No. 1 ignition coil connectors.


b.

Remove the 4 bolts and 4 No. 1 ignition coils from the cylinder head cover sub-assembly.

NOTICE:

If a component has been dropped or subjected to a strong impact, replace the No. 1 ignition coil.



Hide 19100P 3.REMOVE SPARK PLUG

a.
A381918

Using a 14 mm spark plug wrench, remove the 4 spark plugs from the cylinder head sub-assembly.

NOTICE:

If a component has been dropped or subjected to a strong impact, replace the spark plug.