Home › Engine / Hybrid System › 1NR-FE ENGINE CONTROL › ENGINE COOLANT TEMPERATURE SENSOR › from 2016.04
RM30M0E _51 Engine / Hybrid System _053310 1NR-FE ENGINE CONTROL _0260023 ENGINE COOLANT TEMPERATURE SENSOR A

1NR-FE ENGINE CONTROL  ENGINE COOLANT TEMPERATURE SENSOR  REMOVAL  


PROCEDURE

Hide 89422 2.REMOVE ENGINE COOLANT TEMPERATURE SENSOR

a.
A381682

Disconnect the engine coolant temperature sensor connector.


b.
A381919E01
1.271,2.594 1.5,2 true 1.583,1.906 1.906,2.104 0.323,0.198 10 true SST

Using SST, remove the engine coolant temperature sensor and gasket from the cylinder head sub-assembly.

SST
09817-33191  

NOTICE:

If a component has been dropped or subjected to a strong impact, replace the engine coolant temperature sensor.