Home › Engine / Hybrid System › 1NR-FE ENGINE CONTROL › VACUUM SENSOR › from 2016.04
RM30M0E _51 Engine / Hybrid System _053310 1NR-FE ENGINE CONTROL _0260025 VACUUM SENSOR A

1NR-FE ENGINE CONTROL  VACUUM SENSOR  INSTALLATION  


PROCEDURE

Hide 89420H 1.INSTALL VACUUM SENSOR ASSEMBLY

a.

Install a new grommet to the brake booster assembly.


b.
C142639C01
1.208,0.292 1.521,0.448 0.313,0.156 10 *a
*a for LHD: 25° +/- 20°
for RHD: 20° +/- 20°
V100136

Upper of Vehicle


Install the vacuum sensor assembly to the brake booster assembly so that the vacuum sensor assembly is angled as shown in the illustration.


c.

Connect the vacuum sensor assembly connector.