11101J
1.INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Exhaust Side)
Connect the GTS to the DLC3.
Start the engine.
Turn the GTS on.
Warm up the engine.
Turn the A/C on (w/ air conditioning system).
Enter the following menus: Powertrain / Engine and ECT / Active Test / Control the VVT Exhaust Linear (Bank 1).
| Tester Display |
|---|
| Control the VVT Exhaust Linear (Bank1) |
Check the engine speed while operating the camshaft timing oil control valve assembly using the GTS.
| Tester Operation | Specified Condition |
|---|---|
| 0% | Normal engine speed |
| 100% | Engine idles roughly or stalls |
If the result is not acceptable, cool the engine (engine coolant temperature is 50°C (122°F) or less) and perform the Active Test again.
DTCs related to the VVT system may be stored due to Active Test operation, but this does not indicate a malfunction.
If the result is not as specified, check the camshaft timing oil control valve assembly, wire harness and ECM.
11101J
2.INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Intake Side)
Connect the GTS to the DLC3.
Start the engine.
Turn the GTS on.
Warm up the engine.
Turn the A/C on (w/ air conditioning system).
Enter the following menus: Powertrain / Engine and ECT / Active Test / Control the VVT Linear (Bank 1).
| Tester Display |
|---|
| Control the VVT Linear (Bank1) |
Check the engine speed while operating the camshaft timing oil control valve assembly using the GTS.
| Tester Operation | Specified Condition |
|---|---|
| 0% | Normal engine speed |
| 100% | Engine idles roughly or stalls |
If the result is not acceptable, cool the engine (engine coolant temperature is 50°C (122°F) or less) and perform the Active Test again.
DTCs related to the VVT system may be stored due to Active Test operation, but this does not indicate a malfunction.
If the result is not as specified, check the camshaft timing oil control valve assembly, wire harness and ECM.