89422
1.INSPECT ENGINE COOLANT TEMPERATURE SENSOR
Check the resistance.
| *a | Component without harness connected
(Engine Coolant Temperature Sensor) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 1 - 2 | Approximately 20°C (68°F) | 2.32 to 2.59 kΩ |
| Approximately 80°C (176°F) | 0.310 to 0.326 kΩ |
Make sure not to burn yourself.
When checking the engine coolant temperature sensor in water, keep the terminals dry.
After the check, wipe the engine coolant temperature sensor dry.
If the result is not as specified, replace the engine coolant temperature sensor.