Home › Engine / Hybrid System › 2NR-FE ENGINE CONTROL › VACUUM SENSOR › from 2016.04
RM30M0E _51 Engine / Hybrid System _053304 2NR-FE ENGINE CONTROL _0260041 VACUUM SENSOR A

2NR-FE ENGINE CONTROL  VACUUM SENSOR  REMOVAL  


PROCEDURE

Hide 89420H 1.REMOVE VACUUM SENSOR ASSEMBLY

a.
A382939

Disconnect the vacuum sensor assembly connector.


b.

Remove the vacuum sensor assembly from the brake booster assembly.


c.
A382940

Remove the grommet from the brake booster assembly.