Home › Engine / Hybrid System › 2NR-FE ENGINE CONTROL › AIR FUEL RATIO SENSOR › from 2016.04
RM30M0E _51 Engine / Hybrid System _053304 2NR-FE ENGINE CONTROL _0260043 AIR FUEL RATIO SENSOR A

2NR-FE ENGINE CONTROL  AIR FUEL RATIO SENSOR  REMOVAL  


PROCEDURE

Hide 89467B 1.REMOVE AIR FUEL RATIO SENSOR

a.
A381292

Disconnect the air fuel ratio sensor connector.


b.

Disengage the 2 clamps to disconnect the air fuel ratio sensor wire from the wire harness clamp bracket.


c.
A381288E01
0.948,1.563 1.156,1.708 true 1.031,1.74 1.49,1.938 0.458,0.198 10 false SST

Using SST, remove the air fuel ratio sensor from the exhaust manifold converter sub-assembly.

SST
09224-00012  

NOTICE:

If a component has been dropped or subjected to a strong impact, replace the air fuel ratio sensor.