51441C
1.REMOVE ENGINE UNDER COVER RH (w/o Metal Type Under Cover)
Remove the 2 bolts, 4 screws and engine under cover RH from the vehicle.
51451A
2.REMOVE CENTER ENGINE UNDER COVER (w/ Metal Type Under Cover)
51405A
3.REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY (w/ Metal Type Under Cover)
16361A
4.REMOVE FAN AND GENERATOR V BELT
| *a | 5 mm Hexagon Wrench |
| *b | Turn |
Release the fan and generator V belt tension by turning the V-ribbed belt tensioner assembly counterclockwise, and remove the fan and generator V belt from each pulley.
While turning the V-ribbed belt tensioner assembly counterclockwise, align the holes, and then insert a 5 mm hexagon wrench to the holes to secure the V-ribbed belt tensioner assembly.