Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE BOOSTER(for LHD) › 2016.04–2016.10
RM30M0E _54 Brake _017099 BRAKE SYSTEM (OTHER) _0092758 BRAKE BOOSTER(for LHD) A

BRAKE SYSTEM (OTHER)  BRAKE BOOSTER(for LHD)  REASSEMBLY  


PROCEDURE

Hide 44730 1.INSTALL BRAKE VACUUM CHECK VALVE ASSEMBLY (for Automatic Transaxle and CVT)

a.

Install 2 new check valve grommets to the brake booster assembly.


b.

Install the 2 brake vacuum check valve assemblies to the brake booster assembly.


Hide 44730 2.INSTALL BRAKE VACUUM CHECK VALVE ASSEMBLY (for Manual Transaxle)

a.

Install a new check valve grommet to the brake booster assembly.


b.

Install the brake vacuum check valve assembly to the brake booster assembly.


Hide 89420H 3.INSTALL VACUUM SENSOR ASSEMBLY (for 1NR-FE, 2NR-FE)

a.

Install a new grommet to the brake booster assembly.


b.
A318711C07
1.656,0.042 1.969,0.198 0.313,0.156 10 false *a 1.198,0.281 2.125,0.594 0.927,0.313 10 false *b
*a Upper Side of Vehicle
*b 25° +/- 20°


Install the vacuum sensor assembly to the brake booster assembly so that the vacuum sensor assembly is angled as shown in the illustration.


c.

Connect the vacuum sensor assembly connector.