1.INSTALL VACUUM SENSOR ASSEMBLY (for 1NR-FE, 2NR-FE)
Install a new check valve grommet to the brake booster assembly.
| *a | Upper Side of Vehicle |
| *b | 20° +/- 20° |
|
Install the vacuum sensor assembly to the brake booster assembly as shown in the illustration.
44730
2.INSTALL BRAKE VACUUM CHECK VALVE ASSEMBLY (for Automatic Transaxle and CVT)
Install 2 new check valve grommets to the brake booster assembly.
| *a | Upper Side |
| *b | 90° |
Install the 2 brake vacuum check valve assemblies to the brake booster assembly as shown in the illustration.
44730
3.INSTALL BRAKE VACUUM CHECK VALVE ASSEMBLY (for Manual Transaxle)
Install a new check valve grommet to the brake booster assembly.
Install the brake vacuum check valve assembly to the brake booster assembly.