Home › Brake › BRAKE SYSTEM (OTHER) › VACUUM SWITCHING VALVE › 2016.04–2016.10
RM30M0E _54 Brake _017099 BRAKE SYSTEM (OTHER) _0092760 VACUUM SWITCHING VALVE A

BRAKE SYSTEM (OTHER)  VACUUM SWITCHING VALVE  REMOVAL  


PROCEDURE

Hide 12611 1.REMOVE NO. 1 ENGINE COVER (for 1NR-FE, 2NR-FE)

Hide 25860D 2.REMOVE NO. 2 VACUUM SWITCHING VALVE ASSEMBLY (for 1NZ-FE, 2NZ-FE)

a.
C282233

Disconnect the No. 2 vacuum switching valve assembly connector.


b.

Loosen the 2 hose clips and disconnect the No. 2 air hose and No. 3 air hose from the No. 2 vacuum switching valve assembly.


c.
C282234

Remove the nut and No. 2 vacuum switching valve assembly from the hose bracket.


Hide 25860D 3.REMOVE NO. 2 VACUUM SWITCHING VALVE ASSEMBLY (for 1NR-FE, 2NR-FE)

a.
C349599

Disconnect the No. 2 vacuum switching valve assembly connector.


b.

Disengage the No. 1 air hose clamp.


c.

Loosen the 2 hose clips and disconnect the No. 1 air hose and No. 2 air hose from No. 2 vacuum switching valve assembly.


d.
C349600

Remove the bolt and No. 2 vacuum switching valve assembly from the intake manifold assembly.