83181G
1.INSTALL SPEEDOMETER SENSOR
Apply a light coat of gear oil to a new O-ring and install it to the speedometer sensor.
Do not twist the O-ring.
Install the speedometer driven gear to the speedometer sensor with the clip.
Install the speedometer sensor to the manual transaxle assembly with the bolt.
Make sure that the O-ring is not damaged or does not jump out of position during installation.
Connect the connector to the speedometer sensor.
74410
2.INSTALL BATTERY CARRIER ASSEMBLY
74431
3.INSTALL BATTERY TRAY
28800
4.INSTALL BATTERY
5.INSPECT FOR MANUAL TRANSAXLE OIL LEAK