Home › Drivetrain › C50 MANUAL TRANSMISSION / TRANSAXLE › SPEEDOMETER SENSOR(for 2NR-FE) › 2016.04–2017.10
RM30M0E _52 Drivetrain _017090 C50 MANUAL TRANSMISSION / TRANSAXLE _0262550 SPEEDOMETER SENSOR(for 2NR-FE) A

C50 MANUAL TRANSMISSION / TRANSAXLE  SPEEDOMETER SENSOR(for 2NR-FE)  INSTALLATION  


PROCEDURE

Hide 83181G 1.INSTALL SPEEDOMETER SENSOR

a.

Apply a light coat of gear oil to a new O-ring and install it to the speedometer sensor.

NOTICE:

Do not twist the O-ring.



b.

Install the speedometer driven gear to the speedometer sensor with the clip.


c.

Install the speedometer sensor to the manual transaxle assembly with the bolt.

Torque:
11.3 N*m (115 kgf*cm, 8 ft.*lbf)

NOTICE:

Make sure that the O-ring is not damaged or does not jump out of position during installation.



d.

Connect the connector to the speedometer sensor.


Hide 74410 2.INSTALL BATTERY CARRIER ASSEMBLY

Hide 17801 6.INSTALL AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

Hide 17880 8.INSTALL AIR CLEANER HOSE ASSEMBLY

Hide 12262 9.CONNECT NO. 2 VENTILATION HOSE

Hide 10.INSPECT FOR MANUAL TRANSAXLE OIL LEAK