SEAT BELT WARNING SYSTEM DESCRIPTION
Seat belt warning light:
When the driver side seat belt is not fastened and the ignition switch is ON, the seat belt warning light on the combination meter assembly blinks.
When the front passenger side seat belt is not fastened and the ignition switch is ON with the front passenger side seat occupied, the seat belt warning light on the combination meter blinks.*1
Seat belt warning buzzer:
When the vehicle is driven at approximately 20 km/h (12 mph) or more while the driver side seat belt is not fastened, the driver side seat belt warning buzzer in the combination meter assembly sounds at an interval of 1.2 seconds for 30 seconds. After that, the buzzer sounds at an interval of 0.4 seconds for 90 seconds.
When the vehicle is driven at 20 km/h (12 mph) or more with the front passenger seat occupied and the front passenger seat belt not fastened, the seat belt warning buzzer in the combination meter assembly sounds at an interval of 1.2 seconds for 30 seconds. After that, the seat belt warning buzzer in the combination meter assembly sounds at an interval of 0.4 seconds for 90 seconds.*1
*1: w/ Front Passenger Seat Belt Warning System
FUNCTION OF MAIN COMPONENTS
| Component | Function |
|---|---|
| Front seat inner belt assembly (Driver side) | Informs the combination meter assembly of the driver side seat belt condition (fastened or unfastened). |
| Front seat inner belt assembly (Passenger side)*1 | Informs the combination meter assembly of the front passenger side seat belt condition (fastened or unfastened). |
| Separate type front seat cushion pad (Occupant detection sensor)*1 | Informs the combination meter assembly of the front passenger side seat condition. |
| Combination meter assembly | ·
The combination meter assembly illuminates, blinks or turns off the seat belt warning light. ·
The combination meter assembly sounds the driver or passenger side seat belt warning buzzer. |
*1: w/ Front Passenger Seat Belt Warning System