Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › DECELERATION SENSOR › 2016.04–2017.10
RM30M0E _54 Brake _017098 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0264435 DECELERATION SENSOR A

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  DECELERATION SENSOR  INSTALLATION  


PROCEDURE

Hide 89440A 1.INSTALL DECELERATION SENSOR ASSEMBLY

a.

Connect the deceleration sensor assembly connector.


b.

Install the deceleration sensor assembly to the body with the 2 bolts.

Torque:
14 N*m (143 kgf*cm, 10 ft.*lbf)

NOTICE:
·

Do not use any parts that have been dropped or subjected to a strong impact.

·

Make sure to install the deceleration sensor facing in the correct direction.




Hide 58910C 2.INSTALL REAR CONSOLE BOX ASSEMBLY (w/ Console Box Lid)

Hide 58910C 3.INSTALL REAR CONSOLE BOX ASSEMBLY (w/o Console Box Lid)

Hide 4.INSPECT DECELERATION SENSOR SIGNAL