Home › Engine / Hybrid System › 2NR-FE FUEL › FUEL PUMP › from 2016.04
RM30M0E _51 Engine / Hybrid System _053553 2NR-FE FUEL _0265575 FUEL PUMP A

2NR-FE FUEL  FUEL PUMP  DISASSEMBLY  


PROCEDURE

Hide 83320 1.REMOVE FUEL SENDER GAUGE ASSEMBLY

Hide 77785 2.REMOVE FUEL PUMP HARNESS

a.
A311722

Disconnect the 2 connectors to remove the fuel pump harness from the fuel suction tube assembly and fuel pump.


Hide 23221 3.REMOVE FUEL PUMP

a.
A311721

Disengage the 3 claws to remove the fuel pump and fuel pump filter from the No. 1 fuel suction support.

NOTICE:

Do not damage the fuel pump filter.



b.
A246971

While holding the fuel pump filter by the plastic resin part, remove the fuel pump from the fuel pump filter.

NOTICE:

Be careful not to let foreign matter enter the fuel pump or fuel pump filter.



c.
A248126C04
2.229,0.667 2.563,0.51 false 2.229,0.813 2.552,0.927 false 0.49,4.063 0.615,4.219 0.615,4.219 0.781,4.219 true 2.594,0.438 2.76,0.594 0.167,0.156 10 false *1 2.573,0.854 2.74,1.01 0.167,0.156 10 false *2 2.229,1.833 2.396,1.99 0.167,0.156 10 false *a 2.271,2.375 2.438,2.531 0.167,0.156 10 false *a 0.823,4.125 1.135,4.323 0.313,0.198 10 false *1
*1 O-ring
*2 Fuel Pump Spacer
*a 5 mm (0.1969 in.)


Remove the O-ring and fuel pump spacer from the fuel pump.

NOTICE:

Be careful not to damage the sealing surface.


HINT:

If the O-ring still remains in the No. 1 fuel suction support, remove it using a wire tip (φ1 mm (0.0394 in.)) that is formed as shown in the illustration.