Home › Engine / Hybrid System › 2NR-FE INTAKE / EXHAUST › INTAKE SYSTEM › 2016.04–2017.10
RM30M0E _51 Engine / Hybrid System _053549 2NR-FE INTAKE / EXHAUST _0265583 INTAKE SYSTEM G

2NR-FE INTAKE / EXHAUST  INTAKE SYSTEM  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.INSPECT INTAKE SYSTEM

HINT:

Perform "Inspection After Repairs" after repairing or replacing the intake system.

Click hereEngine / Hybrid System>2NR-FE ENGINE CONTROL>SFI SYSTEM>INITIALIZATION


a.

Check that there is no air suction at the points shown in the illustration.

A382678C02
0.167,0.177 0.542,0.417 0.375,0.24 12 false *A
*A for CVT - -



b.

Check that there is no air suction at the points shown in the illustration.

A382673C05
0.167,0.177 0.542,0.417 0.375,0.24 12 false *A
*A for Manual Transaxle - -



Hide 2.PERFORM INITIALIZATION

a.

Perform "Inspection After Repairs" after repairing or replacing the intake system.

Click hereEngine / Hybrid System>2NR-FE ENGINE CONTROL>SFI SYSTEM>INITIALIZATION