Home › Drivetrain › C54 MANUAL TRANSMISSION / TRANSAXLE › SPEEDOMETER SENSOR(for 1NR-FE) › 2016.04–2017.10
RM30M0E _52 Drivetrain _017091 C54 MANUAL TRANSMISSION / TRANSAXLE _0267611 SPEEDOMETER SENSOR(for 1NR-FE) A

C54 MANUAL TRANSMISSION / TRANSAXLE  SPEEDOMETER SENSOR(for 1NR-FE)  INSTALLATION  


PROCEDURE

Hide 83181G 1.INSTALL SPEEDOMETER SENSOR

a.

Apply a light coat of gear oil to a new O-ring and install it to the speedometer sensor.

NOTICE:

Do not twist the O-ring.



b.

Install the speedometer driven gear to the speedometer sensor with the clip.


c.

Install the speedometer sensor to the manual transaxle assembly with the bolt.

Torque:
11.3 N*m (115 kgf*cm, 8 ft.*lbf)

NOTICE:

Make sure that the O-ring is not damaged or does not jump out of position during installation.



d.

Connect the connector to the speedometer sensor.


Hide 17801 6.INSTALL AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

Hide 17880 8.INSTALL AIR CLEANER HOSE ASSEMBLY

Hide 12262 9.CONNECT NO. 2 VENTILATION HOSE

Hide 10.INSPECT FOR MANUAL TRANSAXLE OIL LEAK