Home › Drivetrain › C54 MANUAL TRANSMISSION / TRANSAXLE › SPEEDOMETER SENSOR(for 2NZ-FE) › 2016.04–2016.10
RM30M0E _52 Drivetrain _017091 C54 MANUAL TRANSMISSION / TRANSAXLE _0267614 SPEEDOMETER SENSOR(for 2NZ-FE) A

C54 MANUAL TRANSMISSION / TRANSAXLE  SPEEDOMETER SENSOR(for 2NZ-FE)  INSTALLATION  


PROCEDURE

Hide 83181G 1.INSTALL SPEEDOMETER SENSOR

a.

Apply a light coat of gear oil to a new O-ring and install it to the speedometer sensor.

NOTICE:

Do not twist the O-ring.



b.

Install the speedometer driven gear to the speedometer sensor with the clip.


c.

Install the speedometer sensor to the manual transaxle assembly with the bolt.

Torque:
11.3 N*m (115 kgf*cm, 8 ft.*lbf)

NOTICE:

Make sure that the O-ring is not damaged or does not jump out of position during installation.



d.

Connect the connector to the speedometer sensor.


Hide 5.INSPECT FOR MANUAL TRANSAXLE OIL LEAK