84520
1.REMOVE CLUTCH START SWITCH ASSEMBLY
| *A | for LHD |
| *B | for RHD |
Disconnect the connector from the clutch start switch assembly.
Remove the nut and clutch start switch assembly from the clutch pedal support sub-assembly.
To prevent damage to the clutch start switch assembly, make sure not to rotate it during removal.
88280A
2.REMOVE CLUTCH SWITCH ASSEMBLY (w/ Cruise Control System)
Disconnect the connector from the clutch switch assembly.
Remove the nut and clutch switch assembly from the clutch pedal support sub-assembly.
To prevent damage to the clutch switch assembly, make sure not to rotate it during removal.