84520
1.INSTALL CLUTCH START SWITCH ASSEMBLY
Install the clutch start switch assembly to the clutch pedal support sub-assembly with the nut.
Insert the protrusion of the clutch start switch assembly into the hole in the clutch pedal support sub-assembly.
To prevent damage to the clutch start switch assembly, make sure not to rotate it during installation.
Connect the connector to the clutch start switch assembly.
88280A
2.INSTALL CLUTCH SWITCH ASSEMBLY (w/ Cruise Control System)
Install the clutch switch assembly to the clutch pedal support sub-assembly with the nut.
Insert the protrusion of the clutch switch assembly into the hole in the clutch pedal support sub-assembly.
To prevent damage to the clutch switch assembly, make sure not to rotate it during installation.
Connect the connector to the clutch switch assembly.
3.INSPECT CLUTCH START SYSTEM