Home › Engine / Hybrid System › CRUISE CONTROL › CLUTCH SWITCH › from 2016.04
RM30M0E _51 Engine / Hybrid System _052909 CRUISE CONTROL _0272824 CLUTCH SWITCH A

CRUISE CONTROL  CLUTCH SWITCH  INSTALLATION  


PROCEDURE

Hide 88280A 1.INSTALL CLUTCH SWITCH ASSEMBLY

a.

Install the clutch switch assembly to the clutch pedal support sub-assembly with the nut.

Torque:
15.7 N*m (160 kgf*cm, 12 ft.*lbf)

NOTICE:
·

Insert the protrusion of the clutch switch assembly into the hole in the clutch pedal support sub-assembly.

·

To prevent damage to the clutch switch assembly, make sure not to rotate it during installation.




b.

Connect the connector to the clutch switch assembly.