Home › General › SPECIFICATIONS › 2NR-FE LUBRICATION › from 2016.04
RM30M0E _V1 General _017290 SPECIFICATIONS _0273529 2NR-FE LUBRICATION F

SPECIFICATIONS  2NR-FE LUBRICATION  SERVICE DATA  


Oil pressure
Condition Specified Condition
Idle 30 kPa (0.3 kgf/cm2, 4.4 psi) or more
3000 rpm 150 to 550 kPa (1.5 to 5.6 kgf/cm2, 22 to 80 psi) or more

Oil pressure switch
Tester Condition Condition Specified Condition
1 - Switch body Engine idling 10 kΩ or higher
Engine stopped Below 1 Ω

Standard Oil Grade
Oil Grade Oil Viscosity (SAE)
API grade SL "Energy-Conserving", SM "Energy-Conserving", SN "Resource-Conserving" or ILSAC multigrade engine oil
·

0W-20

·

5W-20

·

5W-30

·

10W-30


API grade SL, SM or SN multigrade engine oil

15W-40

20W-50*



NOTICE:

*: This grade of engine oil cannot be used for Euro IV or higher.


Standard Capacity
Item Specified Condition
Drain and refill with oil filter change 3.3 liters (3.4 US qts, 2.8 Imp. qts)
Drain and refill without oil filter change 3.1 liters (3.3 US qts, 2.7 Imp. qts)
Dry fill 3.9 liters (4.1 US qts, 3.4 Imp. qts)