Home › General › SPECIFICATIONS › BRAKE SYSTEM (OTHER) › 2016.04–2017.10
RM30M0E _V1 General _017290 SPECIFICATIONS _0098438 BRAKE SYSTEM (OTHER) F

SPECIFICATIONS  BRAKE SYSTEM (OTHER)  TORQUE SPECIFICATIONS  


Part Tightened N*m kgf*cm ft.*lbf in.*lbf
Front disc brake bleeder plug x Front disc brake cylinder 8.3 85 73
Rear drum brake bleeder plug x Rear wheel brake cylinder 8.5 87 75
Rear disc brake bleeder plug x Rear disc brake cylinder 11 112 8
Brake tube x Brake master cylinder sub-assembly (Brake line flare nut (10 mm)) Specified tightening torque 15.2 155 11
For use with a union nut wrench 13.4 137 10
Brake tube x Brake master cylinder sub-assembly (Brake line flare nut (12 mm)) Specified tightening torque 19.5 199 14
For use with a union nut wrench 17.4 177 13
Brake master cylinder push rod clevis lock nut 26 265 19
Brake pedal sub-assembly x Brake pedal support sub-assembly 36.8 375 27
Engine mounting insulator sub-assembly RH x Body 52 530 38
Engine mounting insulator sub-assembly RH x Timing chain cover assembly 52 530 38
Brake pedal support sub-assembly x Brake booster assembly 9.0 92 80
Brake pedal support sub-assembly x Instrument panel reinforcement 23.6 241 17
Brake master cylinder sub-assembly x Brake booster assembly 12.5 127 9
No. 2 vacuum switching valve assembly x Hose bracket (for 1NZ-FE, 2NZ-FE) 10 102 7
No. 2 vacuum switching valve assembly x Intake manifold (for 1NR-FE, 2NR-FE) 12 122 9
Proportioning valve assembly x Proportioning valve bracket 5.4 55 48
Brake tube x Proportioning valve assembly Specified tightening torque 15.2 155 11
For use with a union nut wrench 13.4 137 10
Brake tube x Brake tube way Specified tightening torque 15.2 155 11
For use with a union nut wrench 13.4 137 10
Proportioning valve bracket x Body 19 194 14