Home › General › SPECIFICATIONS › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › 2016.04–2017.10
RM30M0E _V1 General _017290 SPECIFICATIONS _0098437 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS F

SPECIFICATIONS  BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  SERVICE DATA  


Deceleration Sensor Assembly:
Tester Connection Sensor Position Specified Condition
3 (GL1) - Battery's negative (-) lead Horizontal Approximately 2.25 V
3 (GL1) - Battery's negative (-) lead Tilted forward Approximately 2.25 to 4.05 V
3 (GL1) - Battery's negative (-) lead Tilted rearward Approximately 0.45 to 2.25 V


VSC OFF Switch:
Tester Connection Condition Specified Condition
9 (+) - 6 (E) Switch pushed Below 1 Ω
9 (+) - 6 (E) Switch not pushed 10 kΩ or higher