Home › Engine / Hybrid System › 1NZ-FE ENGINE MECHANICAL › DRIVE BELT › 2016.07–2016.10
RM30M0E _51 Engine / Hybrid System _017073 1NZ-FE ENGINE MECHANICAL _0090999 DRIVE BELT A

1NZ-FE ENGINE MECHANICAL  DRIVE BELT  REMOVAL  


PROCEDURE

Hide 51441C 1.REMOVE ENGINE UNDER COVER RH

a.

Remove the 2 bolts, 4 screws and engine under cover RH from the vehicle.


Hide 16361A 2.REMOVE FAN AND GENERATOR V BELT

a.
A111164E01
2.281,0.365 2.438,0.563 0.156,0.198 10 false A 1.969,1.948 2.125,2.146 0.156,0.198 10 false B

Loosen the bolts A and B.


b.

Release the fan and generator V belt tension and remove the fan and generator V belt from each pulley.