Home › Engine / Hybrid System › 2NZ-FE INTAKE / EXHAUST › INTAKE SYSTEM › 2016.07–2016.10
RM30M0E _51 Engine / Hybrid System _017080 2NZ-FE INTAKE / EXHAUST _0091234 INTAKE SYSTEM G

2NZ-FE INTAKE / EXHAUST  INTAKE SYSTEM  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.INSPECT INTAKE SYSTEM

a.

Check that there is no air suction at the points shown in the illustration.

A179631C01
0.146,0.125 0.573,0.458 0.427,0.333 12 false *A
*A for Automatic Transaxle - -



b.

Check that there is no air suction at the points shown in the illustration.

A179632C01
0.156,0.115 0.563,0.396 0.406,0.281 12 false *A
*A for Manual Transaxle - -