58910C
1.REMOVE REAR CONSOLE BOX ASSEMBLY
51442C
2.REMOVE ENGINE UNDER COVER LH
33820B
3.DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY
To prevent damage to the transmission control cable assembly and transmission floor shift assembly, disconnect the transmission floor shift assembly side of the transmission control cable assembly before disconnecting the automatic transaxle assembly side.
Apply the parking brake and move the shift lever to N.
Disconnect the end of the transmission control cable assembly from the transmission floor shift assembly.
Remove the nut to disconnect the transmission control cable assembly from the transmission control shaft lever.
Remove the clip to separate the transmission control cable assembly from the No. 1 transmission control cable bracket.
84540
4.REMOVE PARK/NEUTRAL POSITION SWITCH
Disconnect the connector from the park/neutral position switch.
Remove the nut, washer and transmission control shaft lever from the automatic transaxle assembly.
Using a screwdriver, pry off the tabs of the lock plate.
Remove the lock nut and lock plate from the park/neutral position switch.
Remove the 2 bolts and pull out the park/neutral position switch from the automatic transaxle assembly.