Home › General › SPECIFICATIONS › 1NR-FE FUEL › 2016.07–2017.10
RM30M0E _V1 General _017290 SPECIFICATIONS _0264486 1NR-FE FUEL F

SPECIFICATIONS  1NR-FE FUEL  SERVICE DATA  


Battery Standard voltage 11 to 14 V
Fuel pressure Standard fuel pressure 304 to 343 kPa (3.1 to 3.5 kgf/cm2, 44.1 to 49.7 psi)
Fuel pressure : at fuel pressure remains for 5 minutes after engine has stopped Standard fuel pressure 147 kPa (1.5 kgf/cm2, 21 psi) or more
Fuel injector assembly Standard resistance 11.6 to 12.4 Ω at 20°C (68°F)
Injection volume 47 to 57 cc (2.9 to 3.5 cu in.) per 15 seconds
Difference between each fuel injector 10 cc (0.6 cu in.) or less
Standard leakage 1 drop or less every 25 minutes
Fuel pump Standard resistance 0.2 to 3.0 Ω at 20°C (68°F)
Compression spring free length
(Front Side)
Standard 42 mm (1.65 in.)
Minimum 40.5 mm (1.59 in.)
Compression spring free length
(Rear Side) (w/ Compression Spring)
Standard 40 mm (1.57 in.)
Minimum 38.5 mm (1.52 in.)
Flanges space
(Exhaust manifold to Front exhaust pipe assembly)
Standard 8.5 mm (0.335 in.)
Flanges space
(Front exhaust pipe assembly to Tail exhaust pipe assembly) (w/ Compression Spring)
Standard 6.5 mm (0.256 in.)
Fuel sender gauge assembly Standard resistance 13.5 to 16.5 Ω (Float level F)
13.5 to 414.5 Ω (Float level E to F)
405.5 to 414.5 Ω (Float level E)