Home › General › SPECIFICATIONS › 1NR-FE INTAKE / EXHAUST › 2016.07–2017.10
RM30M0E _V1 General _017290 SPECIFICATIONS _0264488 1NR-FE INTAKE / EXHAUST F

SPECIFICATIONS  1NR-FE INTAKE / EXHAUST  TORQUE SPECIFICATIONS  


Part Tightened N*m kgf*cm ft.*lbf in.*lbf
Intake manifold x Cylinder head sub-assembly 28 286 21
Exhaust manifold converter sub-assembly x Cylinder head sub-assembly 40 408 30
Manifold stay x Exhaust manifold converter sub-assembly and Cylinder block sub-assembly 40 408 30
No. 2 exhaust manifold heat insulator x Exhaust manifold converter sub-assembly 7.5 76 66

Part Tightened N*m kgf*cm ft.*lbf
Front exhaust pipe assembly x Exhaust manifold converter sub-assembly 43 440 32
Tail exhaust pipe assembly x Front exhaust pipe assembly
(w/ Compression Spring)
43 440 32
Tail exhaust pipe assembly x Front exhaust pipe assembly
(w/o Compression Spring)
19 194 14
Front floor center brace x Vehicle 30.1 307 22

Part Tightened N*m kgf*cm ft.*lbf
Intake manifold x Vacuum switching valve assembly (for CVT) 12 122 9