Home › Engine / Hybrid System › 2NZ-FE LUBRICATION › OIL PUMP › 2016.07–2016.10
RM30M0E _51 Engine / Hybrid System _017084 2NZ-FE LUBRICATION _0091245 OIL PUMP A

2NZ-FE LUBRICATION  OIL PUMP  DISASSEMBLY  


PROCEDURE

Hide 1.REMOVE OIL PUMP COVER

A116560

a.

Remove the 2 bolts, 3 screws and oil pump cover from the oil pump body.


Hide 2.REMOVE OIL PUMP ROTOR SET

A116561

a.

Remove the oil pump rotor set from the oil pump body.


Hide 3.REMOVE OIL PUMP RELIEF VALVE

A116562C01
2.792,1.469 3.073,1.469 false 2.76,0.833 3.073,0.833 false 2.875,0.396 3.073,0.396 false 3.104,1.375 3.281,1.552 0.177,0.177 10 false *3 3.104,0.729 3.281,0.906 0.177,0.177 10 false *2 3.104,0.302 3.281,0.479 0.177,0.177 10 false *1
*1 Oil Pump Relief Valve Plug
*2 Oil Pump Relief Valve Spring
*3 Oil Pump Relief Valve


a.

Clamp the oil pump cover in a vise.

NOTICE:

Be careful not to damage the oil pump cover in the vise.



b.

Remove the oil pump relief valve plug, oil pump relief valve spring and oil pump relief valve from the oil pump cover.