Home › Drivetrain › CLUTCH › CLUTCH UNIT(for C54) › from 2016.10
RM30M0E _52 Drivetrain _017089 CLUTCH _0091141 CLUTCH UNIT(for C54) A

CLUTCH  CLUTCH UNIT(for C54)  REMOVAL  


PROCEDURE

Hide 31204 2.REMOVE CLUTCH RELEASE FORK SUB-ASSEMBLY

a.
C358091C01
2.99,0.917 3.135,0.792 true 2.875,1.271 3.083,1.438 true 3.167,0.688 3.385,0.896 0.219,0.208 10 false *1 3.115,1.354 3.333,1.552 0.219,0.198 10 false *2
*1 Release Fork Support
*2 Clutch Release Fork Support Boot


Disengage the clutch release fork support boot from the release fork support.


b.

Remove the clutch release fork sub-assembly with the clutch release bearing assembly from the manual transaxle assembly.


Hide 31230 3.REMOVE CLUTCH RELEASE BEARING ASSEMBLY

a.
C358099

Disengage the release bearing hub clip and remove the clutch release bearing assembly from the clutch release fork sub-assembly.


Hide 31232A 4.REMOVE RELEASE BEARING HUB CLIP

a.
C296285C01
1.698,1.854 1.833,1.854 1.833,1.854 2.104,1.51 false 0.594,1.354 0.729,1.354 0.729,1.354 1,1.01 false 1.5,1.781 1.927,2.021 0.427,0.24 10 false *1 0.417,1.271 0.802,1.521 0.385,0.25 10 false *2
*1 Release Bearing Hub Clip
*2 Clutch Release Bearing Assembly


Remove the release bearing hub clip from the clutch release bearing assembly.


Hide 31237 5.REMOVE CLUTCH RELEASE FORK SUPPORT BOOT

a.

Remove the release fork anti-rattle spring from the clutch release fork sub-assembly.


b.

Remove the clutch release fork support boot from the release fork anti-rattle spring.


Hide 31126 6.REMOVE CLUTCH RELEASE FORK BOOT

a.
C295094

Remove the clutch release fork boot from the manual transaxle assembly.


Hide 31236B 7.REMOVE RELEASE FORK SUPPORT

a.
C155093

Using a 19 mm deep socket wrench, remove the release fork support from the manual transaxle assembly.


Hide 31210 8.REMOVE CLUTCH COVER ASSEMBLY

a.
C286942C01
1.135,0.75 0.5,0.844 0.5,0.844 1.063,0.708 true 0.333,0.74 0.646,0.896 0.313,0.156 10 false *a
*a Matchmark


Put the matchmarks on the clutch cover assembly and flywheel sub-assembly.


b.

Loosen each bolt one turn at a time until the spring tension is released.


c.

Remove the 6 bolts and pull off the clutch cover assembly.

NOTICE:

Do not drop the clutch disc assembly.



Hide 31250 9.REMOVE CLUTCH DISC ASSEMBLY

a.

Remove the clutch disc assembly.

NOTICE:

Keep the lining part of the clutch disc assembly, the pressure plate of the clutch cover assembly and the surfaces of the flywheel sub-assembly free of oil and foreign matter.