1.INSTALL VACUUM SENSOR ASSEMBLY
Install a new check valve grommet to the brake booster assembly.
| *a | Upper Side of Vehicle |
| *b | 40° +/- 20° |
Install the vacuum sensor assembly to the brake booster assembly as shown in the illustration.
44730
2.INSTALL BRAKE VACUUM CHECK VALVE ASSEMBLY (for CVT)
Install 2 new check valve grommets to the brake booster assembly.
| *a | Upper Side of Vehicle |
| *b | 90° |
Install the 2 brake vacuum check valve assemblies to the brake booster assembly as shown in the illustration.
44730
3.INSTALL BRAKE VACUUM CHECK VALVE ASSEMBLY (for Manual Transaxle)
Install a new check valve grommet to the brake booster assembly.
Install the brake vacuum check valve assembly to the brake booster assembly.