Home › Vehicle Interior › SEAT › REAR SEAT ASSEMBLY(for Fixed Seat Type) › 2017.10–2018.01
RM30M0E _58 Vehicle Interior _017116 SEAT _0092021 REAR SEAT ASSEMBLY(for Fixed Seat Type) A

SEAT  REAR SEAT ASSEMBLY(for Fixed Seat Type)  DISASSEMBLY  


PROCEDURE

Hide 71940A 1.REMOVE REAR SEAT HEADREST ASSEMBLY

a.

Remove the 2 rear seat headrest assemblies.


Hide 71960B 2.REMOVE REAR SEAT CENTER HEADREST ASSEMBLY

a.

Remove the rear seat center headrest assembly.


Hide 71075B 3.REMOVE BENCH TYPE REAR SEAT CUSHION COVER (for TMT Made)

a.
B476017

Remove the 46 hog rings and bench type rear seat cushion cover from the bench type rear seat cushion pad.


Hide 71075B 4.REMOVE BENCH TYPE REAR SEAT CUSHION COVER (for TMMIN Made)

a.
B350081

Remove the 44 hog rings and bench type rear seat cushion cover from the bench type rear seat cushion pad.


Hide 73344 5.REMOVE REAR SEAT SHOULDER BELT GUIDE LH

HINT:

Use the same procedure for both sides. (for 3 Point Type Rear Center Seat Belt)


a.
B343475

Remove the 2 screws.


b.

Disengage the guide to remove the rear seat shoulder belt guide LH.


Hide 73343 6.REMOVE REAR SEAT SHOULDER BELT GUIDE RH

a.
B356479

Remove the 2 screws.


b.

Disengage the guide to remove the rear seat shoulder belt guide RH.


Hide 7.REMOVE REAR SEAT HEADREST SUPPORT ASSEMBLY

a.
B350077

Disengage the 12 claws and remove the 6 rear seat headrest support assemblies.


Hide 71077B 8.REMOVE BENCH TYPE REAR SEATBACK COVER

a.
B343478

Remove the 34 hog rings and bench type rear seatback cover from the bench type rear seatback pad.