Home › Vehicle Interior › SEAT › REAR SEAT ASSEMBLY(for Fixed Seat Type) › 2017.10–2018.01
RM30M0E _58 Vehicle Interior _017116 SEAT _0092021 REAR SEAT ASSEMBLY(for Fixed Seat Type) A

SEAT  REAR SEAT ASSEMBLY(for Fixed Seat Type)  REASSEMBLY  


PROCEDURE

Hide 71077B 1.INSTALL BENCH TYPE REAR SEATBACK COVER

a.
B343479C01
0.958,3.688 0.875,3.573 false 1.75,4.406 1.844,4.552 false 0.729,3.479 1.042,3.635 0.313,0.156 10 false *1 1.865,4.49 2.177,4.646 0.313,0.156 10 false *a
*1 Hog Ring
*a Hog Ring Pliers


Using hog ring pliers, install the bench type rear seatback cover to the bench type seatback pad with 34 new hog rings.

NOTICE:
·

Be careful not to damage the bench type rear seatback cover.

·

When installing the hog rings, take care to minimize wrinkles as much as possible.

·

Align the center of the hog ring installation area of the bench type rear seatback cover with the center of the bench type rear seatback pad so that no wrinkles appear, and securely tighten the hog rings as shown in the illustration.




Hide 2.INSTALL REAR SEAT HEADREST SUPPORT ASSEMBLY

a.
B350078C01
1.229,0.458 1.188,0.26 false 2.656,0.771 2.729,0.552 false 1.156,0.479 1.469,0.677 0.313,0.198 10 false *a 2.552,0.781 2.865,0.979 0.313,0.198 10 false *a
*a Protruding


Align the protruding portion of the rear seat headrest support assembly with the installation groove of the bench type rear seatback pad.


b.

Engage the 12 claws to install the 6 rear seat headrest support assemblies.


Hide 73344 3.INSTALL REAR SEAT SHOULDER BELT GUIDE LH

HINT:

Use the same procedure for both sides. (for 3 Point Type Rear Center Seat Belt)


a.
B343475

Engage the guide to install the rear seat shoulder belt guide LH.


b.

Install the 2 screws.


Hide 73343 4.INSTALL REAR SEAT SHOULDER BELT GUIDE RH

a.
B356479

Engage the guide to install the rear seat shoulder belt guide RH.


b.

Install the 2 screws.


Hide 71075B 5.INSTALL BENCH TYPE REAR SEAT CUSHION COVER (for TMT Made)

a.
B476018C04
0.917,3.594 0.844,3.49 false 1.656,4.313 1.781,4.5 false 0.698,3.354 1.01,3.552 0.313,0.198 10 false *1 1.813,4.458 2.073,4.667 0.26,0.208 10 false *a
*1 Hog Ring
*a Hog Ring Pliers


Using hog ring pliers, install the bench type rear seat cushion cover to the bench type rear seat cushion pad with 46 new hog rings.

NOTICE:
·

Be careful not to damage the bench type rear seat cushion cover.

·

When installing the hog rings, take care to minimize wrinkles as much as possible.

·

Align the center of the hog ring installation area of the bench type rear seat cushion cover with the center of the bench type rear seat cushion pad so that no wrinkles appear, and securely tighten the hog rings as shown in the illustration.




Hide 71075B 6.INSTALL BENCH TYPE REAR SEAT CUSHION COVER (for TMMIN Made)

a.
B350082C01
0.792,3.49 0.865,3.563 false 1.833,4.469 1.896,4.375 false 0.656,3.406 0.969,3.604 0.313,0.198 10 false *1 1.75,4.469 2.052,4.646 0.302,0.177 10 false *a
*1 Hog Ring
*a Hog Ring Pliers


Using hog ring pliers, install the bench type rear seat cushion cover to the bench type rear seat cushion pad with 44 new hog rings.

NOTICE:
·

Be careful not to damage the bench type rear seat cushion cover.

·

When installing the hog rings, take care to minimize wrinkles as much as possible.

·

Align the center of the hog ring installation area of the bench type rear seat cushion cover with the center of the bench type rear seat cushion pad so that no wrinkles appear, and securely tighten the hog rings as shown in the illustration.




Hide 71960B 7.INSTALL REAR SEAT CENTER HEADREST ASSEMBLY

a.

Install the rear seat center headrest assembly.


Hide 71940A 8.INSTALL REAR SEAT HEADREST ASSEMBLY

a.

Install the 2 rear seat headrest assemblies.