Home › Vehicle Interior › SEAT › FRONT SEAT ASSEMBLY › from 2017.10
RM30M0E _58 Vehicle Interior _017116 SEAT _0092019 FRONT SEAT ASSEMBLY A

SEAT  FRONT SEAT ASSEMBLY  REMOVAL  


CAUTION / NOTICE / HINT

NOTICE:

Always use E10 "TORX" socket wrench when removing the front seat assembly.


HINT:
·

The procedure described below is for the LHD side. Use the same procedure for both the LHD and RHD side, unless otherwise specified.

·

The procedure described below is for the driver side. Use the same procedure for both the driver and front passenger sides, unless otherwise specified.



PROCEDURE

Hide 72138 1.REMOVE REAR OUTER SEAT TRACK BRACKET COVER

a.

Move the front seat assembly to the foremost position.


b.
B356480

Disengage the 4 claws to remove the rear outer seat track bracket cover.


Hide 2.REMOVE FRONT SEAT ASSEMBLY

a.

Disconnect the buckle switch connector.


b.

w/ Front Seat Side Airbag:

i.

Place a finger on the slider, slide the slider to release the lock, and then disconnect the front seat side airbag connector.

C190412C26
1.958,1.958 1.958,0.875 true 3.625,1.958 3.625,0.875 true 1.865,2.01 2.177,2.167 0.313,0.156 10 false *1 3.531,2.01 3.844,2.167 0.313,0.156 10 false *1
*1 Slider - -




c.
B346995

Using an E10 "TORX" socket wrench, remove the 2 bolts on the rear side of the front seat assembly.


d.

Move the front seat assembly to the rearmost position.


e.

Using an E10 "TORX" socket wrench, remove the 2 bolts on the front side of the front seat assembly.


f.

w/ Vertical Adjuster:

i.

Lift up the seat track adjusting handle.



g.

Remove the front seat assembly.

NOTICE:

Be careful not to damage the vehicle body.