AUTOMATIC LIGHT CONTROL SYSTEM OPERATION CHECK (w/ Automatic Light Control System)
Perform this inspection with the customization parameter at the initial setting.
Click hereVehicle Exterior>LIGHTING (EXT)>LIGHTING SYSTEM>CUSTOMIZE PARAMETERS
Turn the ignition switch to ON.
Turn the headlight dimmer switch (light control switch) to the AUTO position.
Cover the automatic light control sensor.
Check that the lights automatically illuminate
Uncover the automatic light control sensor.
Check that the lights automatically turn off.
LIGHT AUTO TURN-OFF SYSTEM OPERATION CHECK (w/ Automatic Light Control System)
Turn the ignition switch to ON and close the driver door.
Set the headlight dimmer switch assembly to the TAIL, HEAD or AUTO position to illuminate the lights.
Turn the ignition switch off and open the driver door. Check that the headlights and taillights turn off.
DAYTIME RUNNING LIGHT SYSTEM (w/ Daytime Running Light)
Headlight dimmer switch (light control switch) is in the OFF or AUTO position (and the taillights are not turned on via the automatic light control system).
Start the engine.
Release the parking brake.
Check that the daytime running lights come on.
FOLLOW ME HOME SYSTEM (w/ Follow Me Home System)
The ignition switch is off.
Turn the headlight dimmer switch (light control switch) is in the AUTO position.
The headlight dimmer switch (light control switch) is pulled to flash the headlights once.
Check that the low beam headlights come on for approximately 30 seconds.