Home › Steering › POWER ASSIST SYSTEMS › POWER STEERING SYSTEM(for TMT Made) › 2017.10–2018.01
RM30M0E _55 Steering _017103 POWER ASSIST SYSTEMS _0333397 POWER STEERING SYSTEM(for TMT Made) J

POWER ASSIST SYSTEMS  POWER STEERING SYSTEM(for TMT Made)  EPS Warning Light Circuit  


CAUTION / NOTICE / HINT

NOTICE:
·

Perform this troubleshooting procedure when no DTCs are output, including DTCs related to CAN communication system malfunctions.

·

If the customer reports that the steering feels heavy, refer to the "Heavy steering" item in the Problem Symptoms Table.

Click hereSteering>POWER ASSIST SYSTEMS>POWER STEERING SYSTEM(for TMT Made)>PROBLEM SYMPTOMS TABLE



PROCEDURE

1.INSPECT COMBINATION METER ASSEMBLY
a.

Perform the Active Test of the combination meter assembly using the GTS.

Click hereVehicle Interior>METER / GAUGE / DISPLAY>METER / GAUGE SYSTEM>DATA LIST / ACTIVE TEST

Body Electrical > Combination Meter > Active Test
Tester Display
Indicat. EPS
50004 122 22

b.

Check the combination meter assembly.

OK:

The EPS warning light turns on or off in accordance with the GTS operation.



Result:
Proceed to
OK
NG



OK

REPLACE POWER STEERING ECU ASSEMBLY

NG