Home › Vehicle Interior › POWER OUTLETS (INT) › POWER OUTLET SOCKET(for TMMIN Made) › 2017.10–2018.01
RM30M0E _58 Vehicle Interior _017119 POWER OUTLETS (INT) _0333429 POWER OUTLET SOCKET(for TMMIN Made) A

POWER OUTLETS (INT)  POWER OUTLET SOCKET(for TMMIN Made)  REMOVAL  


PROCEDURE

Hide 33504F 1.REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)

Hide 33504F 2.REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for CVT)

Hide 58808 3.REMOVE SHIFTING HOLE COVER SUB-ASSEMBLY (for Manual Transaxle)

Hide 4.REMOVE POSITION INDICATOR HOUSING SUB-ASSEMBLY (for CVT)

Hide 58804A 5.REMOVE FRONT CONSOLE UPPER PANEL SUB-ASSEMBLY

Hide 85530 6.REMOVE NO. 1 POWER OUTLET SOCKET ASSEMBLY

a.
B347394C02
1.583,1.281 1.833,1.708 true 1.802,1.708 2.115,1.865 0.313,0.156 10 false *a
*a Protective Tape


Using a screwdriver with its tip wrapped in protective tape, disengage the claw and then turn the No. 1 power outlet socket assembly clockwise and pull the No. 1 power outlet socket assembly halfway out.


b.
B347395C02
1.083,1.26 1.302,0.948 true 1.104,1.344 1.458,1.646 true 1.49,1.563 1.771,1.729 0.281,0.167 10 false *a 1.333,0.854 1.646,1.01 0.313,0.156 10 false *b
*a Protrusion
*b Cutout


Align the protrusion of the No. 1 power outlet socket assembly with the cutout of the No. 1 power outlet socket cover and then pull the No. 1 power outlet socket assembly out.


Hide 85535B 7.REMOVE NO. 1 POWER OUTLET SOCKET COVER

a.
B347396

Disengage the 2 claws to remove the No. 1 power outlet socket cover.

NOTICE:

Perform this procedure only when replacement of the No. 1 power outlet socket cover is necessary.