Home › Brake › BRAKE (FRONT) › FRONT BRAKE FLEXIBLE HOSE › from 2017.10
RM30M0E _54 Brake _017100 BRAKE (FRONT) _0092767 FRONT BRAKE FLEXIBLE HOSE A

BRAKE (FRONT)  FRONT BRAKE FLEXIBLE HOSE  REMOVAL  


CAUTION / NOTICE / HINT

NOTICE:

If both LH side front flexible hose and RH side front flexible hose are separated at the same time, be sure to place identification marks indicating the position on each side.


HINT:
·

Use the same procedure for the LH side and RH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 1.REMOVE FRONT WHEEL

Hide 2.DRAIN BRAKE FLUID

NOTICE:

If brake fluid leaks onto any painted surface, immediately wash it off.


Hide 47313A 3.REMOVE FRONT FLEXIBLE HOSE

a.
C294089

Using a 10 mm union nut wrench, disconnect the brake tube from the front flexible hose while holding the front flexible hose with a wrench.

NOTICE:
·

Do not bend or damage the brake tube.

·

Do not allow any foreign matter such as dirt or dust to enter the brake tube from the connecting parts.




b.

Remove the clip to separate the front flexible hose from the body.


c.

Remove the bolt to separate the front flexible hose and front speed sensor wire from the front shock absorber assembly.


d.
C294082

Remove the union bolt, gasket and front flexible hose from the front disc brake cylinder assembly.