Home › Drivetrain › K312 CVT › SHIFT LEVER(for TMMIN Made) › 2017.10–2018.01
RM30M0E _52 Drivetrain _052969 K312 CVT _0333886 SHIFT LEVER(for TMMIN Made) A

K312 CVT  SHIFT LEVER(for TMMIN Made)  DISASSEMBLY  


PROCEDURE

Hide 35906 1.REMOVE INDICATOR LIGHT WIRE SUB-ASSEMBLY

a.
C354287

Disengage the 4 clamps to separate the indicator light wire sub-assembly from the upper position indicator housing and position indicator light housing.


b.

Turn the indicator light wire sub-assembly counterclockwise and remove it from the position indicator light housing.


Hide 35961 2.REMOVE POSITION INDICATOR LIGHT HOUSING

a.
C354288

Remove the 2 screws to position indicator light housing from the upper position indicator housing.


Hide 35921 3.REMOVE CONTROL POSITION INDICATOR PLATE

a.
C354289

Remove the control position indicator plate from the upper position indicator housing.


Hide 33554C 4.REMOVE SHIFT LOCK RELEASE BUTTON COVER

a.
C354290

Disengage the 2 claws to remove the shift lock release button cover from the upper position indicator housing.


Hide 33563 5.REMOVE NO. 2 SHIFT LOCK RELEASE BUTTON

a.
C286323

Disengage the 2 claws to remove the No. 2 shift lock release button from the position indicator light housing.


Hide 33866 6.REMOVE NO. 2 SHIFT LOCK RELEASE SPRING

a.

Remove the No. 2 shift lock release spring from the No. 2 shift lock release button.


Hide 35971E 7.REMOVE POSITION INDICATOR HOUSING

a.
C354307

Disengage the 4 claws to remove the position indicator housing from the lower position indicator housing.


Hide 35975 8.REMOVE NO. 1 POSITION INDICATOR SLIDE COVER

a.
C354308

Remove the No. 1 position indicator slide cover from the lower position indicator housing.


Hide 35976 9.REMOVE NO. 2 POSITION INDICATOR SLIDE COVER

a.
C282040

Align the cutouts on the shank of the No. 2 position indicator slide cover and No. 1 position indicator slide cover, and remove the No. 2 position indicator slide cover from the No. 1 position indicator slide cover.


Hide 35974 10.REMOVE LOWER POSITION INDICATOR HOUSING

a.
C354305

Using a screwdriver, disengage the 4 claws to remove the lower position indicator housing from the shift lock control unit assembly.


Hide 33563 11.REMOVE NO. 1 SHIFT LOCK RELEASE BUTTON

a.
C286329

Disengage the 3 claws to remove the No. 1 shift lock release button from the shift lock control unit assembly.


Hide 33866 12.REMOVE NO. 1 SHIFT LOCK RELEASE SPRING

a.

Remove the No. 1 shift lock release spring from the No. 1 shift lock release button.