Home › Drivetrain › K312 CVT › SHIFT LEVER(for TMMIN Made) › 2017.10–2018.01
RM30M0E _52 Drivetrain _052969 K312 CVT _0333886 SHIFT LEVER(for TMMIN Made) A

K312 CVT  SHIFT LEVER(for TMMIN Made)  REASSEMBLY  


PROCEDURE

Hide 33866 1.INSTALL NO. 1 SHIFT LOCK RELEASE SPRING

a.

Install the No. 1 shift lock release spring to the No. 1 shift lock release button.


Hide 33563 2.INSTALL NO. 1 SHIFT LOCK RELEASE BUTTON

a.
C286329

Engage the 3 claws to install the No. 1 shift lock release button to the shift lock control unit assembly.


Hide 3.INSTALL LOWER POSITION INDICATOR HOUSING

a.
C354306

Engage the 4 claws to install the lower position indicator housing to the shift lock control unit assembly.


Hide 35976 4.INSTALL NO. 2 POSITION INDICATOR SLIDE COVER

a.
C282040

Install the No. 2 position indicator slide cover to the No. 1 position indicator slide cover.


Hide 35975 5.INSTALL NO. 1 POSITION INDICATOR SLIDE COVER

a.
C354304C01
2.76,1.146 3.125,1.458 false 3.156,1.448 3.365,1.646 0.208,0.198 10 false *a
*a Alignment Mark
V100136

Front Side of Vehicle


Install the No. 1 position indicator slide cover to the lower position indicator housing.

NOTICE:

Install the position indicator slide cover so that its alignment mark points to the front of the vehicle.



Hide 35971E 6.INSTALL POSITION INDICATOR HOUSING

a.
C354307

Engage the 4 claws to install the position indicator housing to the lower position indicator housing.


Hide 33866 7.INSTALL NO. 2 SHIFT LOCK RELEASE SPRING

a.

Install the No. 2 shift lock release spring to the No. 2 shift lock release button.


Hide 33563 8.INSTALL NO. 2 SHIFT LOCK RELEASE BUTTON

a.
C286323

Engage the 2 claws to install the No. 2 shift lock release button to the position indicator light housing.


Hide 33554C 9.INSTALL SHIFT LOCK RELEASE BUTTON COVER

a.
C354290

Engage the 2 claws to install the shift lock release button cover to the upper position indicator housing.


Hide 35921 10.INSTALL CONTROL POSITION INDICATOR PLATE

a.
C354289

Install the control position indicator plate to the upper position indicator housing.


Hide 35961 11.INSTALL POSITION INDICATOR LIGHT HOUSING

a.
C354288

Install the position indicator light housing to the upper position indicator housing with the 2 screws.


Hide 35906 12.INSTALL INDICATOR LIGHT WIRE SUB-ASSEMBLY

a.
C354287

Turn the indicator light wire sub-assembly clockwise and install it to the position indicator light housing.


b.

Engage the 4 clamps to install the indicator light wire sub-assembly to the position indicator light housing and upper position indicator housing.