Home › Drivetrain › K312 CVT › SHIFT LEVER(for TMT Made) › 2017.10–2018.01
RM30M0E _52 Drivetrain _052969 K312 CVT _0333889 SHIFT LEVER(for TMT Made) A

K312 CVT  SHIFT LEVER(for TMT Made)  DISASSEMBLY  


PROCEDURE

Hide 58804A 1.REMOVE FRONT UPPER CONSOLE PANEL SUB-ASSEMBLY

a.
C381181

Remove the 4 screws and front upper console panel sub-assembly from the lower position indicator housing.


Hide 35921 2.REMOVE CONTROL POSITION INDICATOR PLATE

a.
C381182

Disengage the claw and guide to remove the control position indicator plate from the lower position indicator housing.


Hide 33554C 3.REMOVE SHIFT LOCK RELEASE BUTTON COVER

a.
C381183

Disengage the 2 claws to remove the shift lock release button cover from the control position indicator plate.


Hide 33563 4.REMOVE SHIFT LOCK RELEASE BUTTON

a.
C381184

Disengage the 2 claws to remove the shift lock release button from the lower position indicator housing.


Hide 33866 5.REMOVE SHIFT LOCK RELEASE SPRING

a.

Remove the shift lock release spring from the shift lock release button.


Hide 35952 6.REMOVE POSITION INDICATOR LIGHT LENS

a.
C381185

Disengage the claw to remove the position indicator light lens from the lower position indicator housing.


Hide 35906 7.REMOVE INDICATOR LIGHT WIRE SUB-ASSEMBLY (for LHD)

a.
C381186

Disengage the 3 clamps.


b.
C381187

Disengage the claw to remove the indicator light wire sub-assembly from the lower position indicator housing.


Hide 35906 8.REMOVE INDICATOR LIGHT WIRE SUB-ASSEMBLY (for RHD)

a.
C375351

Disengage the 3 clamps.


b.
C375352

Disengage the claw to remove the indicator light wire sub-assembly from the lower position indicator housing.


Hide 35971E 9.REMOVE POSITION INDICATOR HOUSING

a.
C381188

Disengage the 4 claws to remove the position indicator housing from the lower position indicator housing.


Hide 35975 10.REMOVE POSITION INDICATOR SLIDE COVER

a.
C381189

Remove the position indicator slide cover from the lower position indicator housing.


Hide 35976 11.REMOVE NO. 2 POSITION INDICATOR SLIDE COVER

a.
C381190

Align the cutouts on the shank of the No. 2 position indicator slide cover and position indicator slide cover, and remove the No. 2 position indicator slide cover from the position indicator slide cover.


Hide 35971A 12.REMOVE UPPER POSITION INDICATOR HOUSING

a.
C381191

Using a screwdriver, disengage the 4 claws to remove the upper position indicator housing from the shift lock control unit assembly.


Hide 33563 13.REMOVE NO. 2 SHIFT LOCK RELEASE BUTTON

a.
C381192

Disengage the 3 claws to remove the No. 2 shift lock release button from the shift lock control unit assembly.


Hide 33866 14.REMOVE NO. 2 SHIFT LOCK RELEASE SPRING

a.

Remove the No. 2 shift lock release spring from the No. 2 shift lock release button.