33866
1.INSTALL NO. 2 SHIFT LOCK RELEASE SPRING
Install the No. 2 shift lock release spring to the No. 2 shift lock release button.
33563
2.INSTALL NO. 2 SHIFT LOCK RELEASE BUTTON
Engage the 3 claws to install the No. 2 shift lock release button to the shift lock control unit assembly.
35971A
3.INSTALL UPPER POSITION INDICATOR HOUSING
Engage the 4 claws to install the upper position indicator housing to the shift lock control unit assembly.
35976
4.INSTALL NO. 2 POSITION INDICATOR SLIDE COVER
Align the cutouts on the shank of the No. 2 position indicator slide cover and position indicator slide cover, and install the No. 2 position indicator slide cover to the position indicator slide cover.
35975
5.INSTALL POSITION INDICATOR SLIDE COVER
| *a | Alignment Mark |
|
Front of Vehicle |
Install the position indicator slide cover to the lower position indicator housing.
Install the position indicator slide cover so that its alignment mark points to the front of the vehicle.
35971E
6.INSTALL POSITION INDICATOR HOUSING
Engage the 4 claws to install the position indicator housing to the lower position indicator housing.
35906
7.INSTALL INDICATOR LIGHT WIRE SUB-ASSEMBLY (for LHD)
Engage the claw to install the indicator light wire sub-assembly to the lower position indicator housing.
Engage the 3 clamps.
35906
8.INSTALL INDICATOR LIGHT WIRE SUB-ASSEMBLY (for RHD)
Engage the claw to install the indicator light wire sub-assembly to the lower position indicator housing.
Engage the 3 clamps.
35952
9.INSTALL POSITION INDICATOR LIGHT LENS
Engage the claw to install the position indicator light lens to the lower position indicator housing.
33866
10.INSTALL SHIFT LOCK RELEASE SPRING
Install the shift lock release spring to the shift lock release button.
33563
11.INSTALL SHIFT LOCK RELEASE BUTTON
Engage the 2 claws to install the shift lock release button to the lower position indicator housing.
33554C
12.INSTALL SHIFT LOCK RELEASE BUTTON COVER
Engage the 2 claws to install the shift lock release button cover to the control position indicator plate.
35921
13.INSTALL CONTROL POSITION INDICATOR PLATE
Engage the guide and claw to install the control position indicator plate to the lower position indicator housing.
58804A
14.INSTALL FRONT UPPER CONSOLE PANEL SUB-ASSEMBLY
Install the front upper console panel sub-assembly to the lower position indicator housing with the 4 screws.