Home › Vehicle Interior › METER / GAUGE / DISPLAY › METER / GAUGE SYSTEM › from 2017.10
RM30M0E _58 Vehicle Interior _017113 METER / GAUGE / DISPLAY _0087658 METER / GAUGE SYSTEM W

METER / GAUGE / DISPLAY  METER / GAUGE SYSTEM  CUSTOMIZE PARAMETERS  


CUSTOMIZE METER / GAUGE SYSTEM


a.

Customizing with the GTS

i.

Connect the GTS to the DLC3.


ii.

Turn the ignition switch to ON.


iii.

Turn the GTS on.


iv.

Enter the following menus: Customize Setting / Warning or Display.


v.

Select the setting by referring to the table below.

NOTICE:

Be sure to record the current value before customizing.


Warning
Tester Display Description Default Setting ECU
Key Remind Sound Function to change the frequency of the key reminder warning buzzer Slow 00:Normal,01:Slow,10:Fast Combination meter assembly
Driver Side Seatbelt Warning Buzzer Function to turn on/off the seat belt warning buzzer ON 0:OFF,1:ON Combination meter assembly
Front Passenger Side Seatbelt Warning Buzzer Function to turn on/off the seat belt warning buzzer*1 ON 0:OFF,1:ON Combination meter assembly
Rear Seatbelt Warning Buzzer Function to turn on/off the seat belt warning buzzer*2 ON 0:OFF,1:ON Combination meter assembly
50006 7

*1: w/ Front Passenger Seat Belt Warning System

*2: w/ Rear Seat Belt Warning System


Display
Tester Display Description Default Setting ECU
ECO Drive Indicator Zone Function to change the ECO drive indicator zone ON 0:OFF,1:ON Combination meter assembly
50006 14