73480
1.INSPECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH (w/ Seat Belt Warning System)
| *a | Component without harness connected
(Rear seat inner with center belt assembly LH) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 1 - 2 | LH side tongue plate fastened | 10 kΩ or higher |
| 1 - 2 | LH side tongue plate released | Below 1 Ω |
If the result is not as specified, replace the rear seat inner with center belt assembly LH.