SEAT BELT WARNING SYSTEM DESCRIPTION
If a seat belt is not fastened, this system flashes the seat belt warning light or sounds the seat belt warning buzzer as a reminder.
Front seat belt warning light:
When the driver side seat belt is not fastened and the ignition switch is ON, the seat belt warning light on the combination meter assembly blinks.
When the front passenger side seat belt is not fastened and the ignition switch is ON with the front passenger side seat occupied, the seat belt warning light on the combination meter blinks.*1
Rear seat belt warning light*2:
When a either door is opened and closed (the either door courtesy light switch turns on and off) with the ignition switch ON, or when the ignition switch is turned from off to ON, the rear seat belt warning light in the telltale light assembly turns on to inform the driver of the rear seat belt condition. The combination meter assembly detects the rear seat belt status and sends signals to the telltale light assembly.
Seat belt warning buzzer:
When the vehicle is driven at approximately 20 km/h (12 mph) or more while the driver side seat belt is not fastened, the driver side seat belt warning buzzer in the combination meter assembly sounds at an interval of 1.2 seconds for 30 seconds. After that, the buzzer sounds at an interval of 0.4 seconds for 90 seconds.
When the vehicle is driven at 20 km/h (12 mph) or more with the front passenger seat occupied and the front passenger seat belt not fastened, the seat belt warning buzzer in the combination meter assembly sounds at an interval of 1.2 seconds for 30 seconds. After that, the seat belt warning buzzer in the combination meter assembly sounds at an interval of 0.4 seconds for 90 seconds.*1
When the vehicle is driven at 20 km/h (12 mph) or more while the rear seat belt is not fastened, the rear seat belt warning buzzer in the combination meter assembly will sound at an interval of 1.2 seconds for 30 seconds. After that, the buzzer sounds at an interval of 0.4 seconds for 90 seconds.*2
*1: w/ Front Passenger Seat Belt Warning System
*2: w/ Rear Seat Belt Warning System
FUNCTION OF MAIN COMPONENTS
| Component | Function |
|---|---|
| Front seat inner belt assembly (Driver side) | Informs the combination meter assembly of the driver side seat belt condition (fastened or unfastened). |
| Front seat inner belt assembly (Passenger side)*1 | Informs the combination meter assembly of the front passenger side seat belt condition (fastened or unfastened). |
| Occupant detection sensor (Separate type front seat cushion pad)*1 | Informs the combination meter assembly of the front passenger side seat condition. |
| Rear seat inner with center belt*2 | Informs combination meter assembly of rear seat belt condition (fastened or unfastened) |
| Combination meter assembly | ·
The combination meter assembly illuminates, blinks or turns off the seat belt warning light. ·
The combination meter assembly sounds the driver or passenger side seat belt warning buzzer. |
*1: w/ Front Passenger Seat Belt Warning System
*2: w/ Rear Seat Belt Warning System