81240J
1.REMOVE ROOM LIGHT ASSEMBLY
| *a | Protective Tape |
Using a screwdriver with its tip wrapped with protective tape, disengage the 4 claws to remove the room light lens.
| *a | Protective Tape |
Using a screwdriver with its tip wrapped with protective tape, disengage the 4 claws to separate the room light housing.
| *a | Protective Tape |
Disengage the clamp.
Using a screwdriver with its tip wrapped with protective tape, disengage the 4 claws to remove the room light housing.
81240L
2.REMOVE ROOM LIGHT BULB
Remove the room light bulb.